Tel: +44 (0) 1749 938017
Bench-top Vacuum Systems, Bespoke Control System Design
Website designed by Benchtop Ltd. Benchtop Ltd 2013
Products
Back
Next
Power Distribution Unit

An ideal accessory for the Process Controller family, the Power Distribution Unit allows for simple and tidy mains/DC connections to multiple instruments within your system

The 4U enclosure allows for up to seven mains circuits and 5 DC circuits. All circuits are protected with easily accessible fuses or MCBs.

Each circuit can be individually controlled and/or monitored by a host controller.

The unit may be powered from a 3 phase or single phase supply. The configuration is entirely application specific and can be designed as such.

Each unit comes fully CE marked.

The datasheet can be downloaded here. (not yet available)
Series 200 Process Controller

The Series 200 Process Controller contains everything neccessary to get your automation project off the ground.

Within the 4U enclosure sits a touchscreen interface, a high capacity power supply, PLC with a high I/O count (both analogue and digital), and connections for RS232, RS485, and ethernet.

The controller can be fully configured and wired up to suit your unique application

The controller can be supplied in kit form (with correctly specified I/O), wired ready by Benchtop to your specifications, or we can provide you with a full turnkey solution complete with fully documented wiring diagrams and PLC software. To complete the system we can also offer SCADA or HMI, with a completely bespoke GUI.

Each unit can be fully CE tested.

The datasheet can be downloaded here. (not yet available)
Series 100 Process Controller

The Series 100 Process Controller contains everything neccessary to get your automation project off the ground.

Within the 4U enclosure sits a high capacity power supply, PLC with a high I/O count (both analogue and digital), and connections for RS232, RS485, and ethernet.

The controller can be fully configured and wired up to suit your unique application

The controller can be supplied in kit form (with correctly specified I/O), wired ready by Benchtop to your specifications, or we can provide you with a full turnkey solution complete with fully documented wiring diagrams and PLC software. To complete the system we can also offer SCADA or HMI, with a completely bespoke GUI.

Each unit can be fully CE tested.

The datasheet can be downloaded here. (not yet available)
Benchtop Products

Please click on the images below for further information.

Benchtop is constantly developing and producing new ideas. Please follow us on twitter and facebook, or re-visit the website for the latest developments.
Alignment Jig

Provides laboratories with the ability to pre-align instrumentation before coupling to a vacuum chamber to help improve experimental throughput, an

The instrument mounting flange can be made to suit your specific mounting specification, or adaptors can be supplied if more than one mounting configuration is required.

The model shown has an 1800mm long bed, but longer or shorter ones can be supplied as requested. The alignment target is manually moved and is accurate to 1mm. An automated alignment target or digital readback is also available.

The jig features fully extendable storage drawers, and may also be fitted with shelving at the rear.

The datasheet can be downloaded here. (not yet available)